Web Fusée Launcher

Fusee Launcher ported to JavaScript using WebUSB.

Precautions: If there is any problem, please hold POWER for 12 seconds to restart.

Pre-action:

• You need to bridging Pad 1 and 10 [GND: 1,2,7]
  
  The goal in this method is to use any piece of conductive material to bridge pad 10 with a ground. The metal could be anything from proper wire, to a paper clip, to a screwdriver. The ground could be any grounded metal, including the joycon rail itself, or pads 1, 2, or 7. Make sure you DO NOT contact pad 4 when the console is booting/on. Pad 4 provides power to the Joycons and will fry your console if you bridge to it.
• paper clip location:
  
• bridging Pad 1 and 10 Examples:
  
• Some more methods can find here.

Instructions:

1. Put the Switch in RCM, and connect it to your device.
2. Select either the example payload, or upload one.
3. Press 'Do the thing!'
4. On the consent screen that appears, select 'APX' and hit confirm.
5. If all goes well, the payload will launch!

Random stuff:

• This is pretty poorly tested. I just kind wrote it and whatever. I'm not responsible if anything goes wrong!
• This does NOT work on Windows due to a limitation in the Chrome implementation of WebUSB (and probably other reasons!)
• This does NOT currently work on any browser but Chrome, because they don't implement WebUSB.
• On Linux, you might get an access denied error! If you do, you can try creating a file at /etc/udev/rules.d/50-switch.rules
  With the following contents:
  SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0664", GROUP="plugdev"
• This has been tested and appears to work on Linux, OSX, Android (unrooted) and Chromebooks. Your mileage may vary.

Problem on atmosphere OS reading folder:

• sudo chflags -R arch /Volumes/SDNAME/
• sudo dot_clean -mn /Volumes/SDNAME/

Payload:

Result: